0F 30         WRMSR                 Write the value in EDX:EAX to MSR specified by ECX


Description

Writes the contents of registers EDX:EAX into the 64-bit model specific register (MSR) specified in the ECX register. The high-order 32 bits are copied from EDX and the low-order 32 bits are copied from EAX. Always set the undefined or reserved bits in an MSR to the values previously read.


This instruction must be executed at privilege level 0 or in real-address mode; otherwise, a general protection exception #GP(0) will be generated. Specifying a reserved or unimplemented MSR address in ECX will also cause a general protection exception.


When the WRMSR instruction is used to write to an MTRR, the TLBs are invalidated, including the global entries (see "Translation Lookaside Buffers (TLBs)" in Chapter 3 of the Intel Architecture Software Developer's Manual, Volume 3). (MTRRs are an implementation-specific feature of the Pentium Pro processor.)


The MSRs control functions for testability, execution tracing, performance monitoring and machine check errors. Appendix B, Model-Specific Registers (MSRs), in the Intel Architecture Software Developer's Manual, Volume 3, lists all the MSRs that can be written to with this instruction and their addresses.


The WRMSR instruction is a serializing instruction (see "Serializing Instructions" in Chapter 7 of the Intel Architecture Software Developer's Manual, Volume 3).


The CPUID instruction should be used to determine whether MSRs are supported (EDX[5]=1) before using this instruction.


Operands        Bytes                Clocks

               2                30-45   NP


Flags

None.

Created with the Personal Edition of HelpNDoc: Free help authoring environment