0F 00 /2         LLDT r/m16         Load segment selector r/m16 into LDTR


Description

Loads the source operand into the segment selector field of the local descriptor table register (LDTR). The source operand (a general-purpose register or a memory location) contains a segment selector that points to a local descriptor table (LDT). After the segment selector is loaded in the LDTR, the processor uses to segment selector to locate the segment descriptor for the LDT in the global descriptor table (GDT). It then loads the segment limit and base address for the LDT from the segment descriptor into the LDTR. The segment registers DS, ES, SS, FS, GS, and CS are not affected by this instruction, nor is the LDTR field in the task state segment (TSS) for the current task.


If the source operand is 0, the LDTR is marked invalid and all references to descriptors in the LDT (except by the LAR, VERR, VERW or LSL instructions) cause a general protection excep-tion (#GP).


The operand-size attribute has no effect on this instruction.


The LLDT instruction is provided for use in operating-system software; it should not be used in application programs. Also, this instruction can only be executed in protected mode.


Operands        Bytes                Clocks

r16                 3                   9   NP

mem16             3+d(0-2)         9   NP


Flags

None.

Created with the Personal Edition of HelpNDoc: Benefits of a Help Authoring Tool